Home Up

 

WELCOME TO THE ALL NEW PERRY PRODUCTS WEB SITE, A DIVISION OF CONLEY PRECISION ENGINES!!!!

 

 

 

 

Nitro Cars And Trucks

 

****BEFORE ORDERING****

You will need to know the exact outside diameter of the neck of the customerís carburetor or the inside diameter of the hole in the crankcase that the carburetor goes into.  For a .12 to .15 engine it will be 10mm, 11mm,12mm,13mm, or 14mm. For a .21 engine it will be 13mm, 14mm, or 15 mm.

When ordering an AVM Intercooler, the first two digits represent the size of engine i.e. 15 = .15 engineThe second two digits represent the outside diameter of the neck of the carburetor i.e. 10 = 10 mmThe last set of two digits represent the inside diameter of the AVM i.e. 10 = 10 mm bore When ordering a Pump and AVM Intercooler system, the first two digits represent the VP-30 pumpThe second two digits represent the size of the engine i.e. 12 = .12 engineThe last sets of two digits represent the outside diameter of the neck of the carb i.e. 12 = 12mmWhen ordering a complete Carb and Pump system, the first set of two digits represent the engine size i.e. 15 = 15mmThe second set of two digits represent the outside diameter of the neck of the carb i.e. 10 = 10mmThe last set of two digits represent the bore of the carburetor i.e. 20 = .200 bore size, 23 = .230 bore size.

 

hit counter

Home ] Up ]

Send mail to engines@conleyprecision.com with questions or comments about this web site.
Copyright © 2001 Conley Precision Engines
Custom Search